PRO2 is the ultimate sealant. This is because it’s compatible with virtually all building materials, so users benefit from permanent adhesive elasticity everywhere.
It’s the perfect companion for plumbers, decorators and especially kitchen fitters. Because it’s certified as food safe, it can be used to seal joints in food preparation areas located in commercial kitchens. In fact its ideal for use on any job where flexibility is important.
With impressive levels of high grab strength, PRO2 can also be used as an adhesive. This makes it suitable for bonding a wide range of common building materials, as well has vertically fixing some heavy items without the need for temporary supports.
Ideal for finishing off a wide range of jobs including sealing sanitary joints in bathrooms and kitchens. Fitting and sealing heavy items like natural stone counter worktops. And attaching and sealing skirting boards, steps, protective profiles and prefab elements.
Key Features
- Delivers permanent elasticity.
- Stick virtually anything to anything.
- Will not stain materials
- Will not corrode metals
- Certified food safe by iSEGA
- Works in the wet and dries underwater.
- +/- 25% joint movement.
- Resistant to weather, extreme temperatures, mould & chemicals.
- Can be painted.
- Does not contain solvents, isocyanates or phthalates.
- CE certified & tested
Hippo PRO2 Black Sealant & Adhesive 310 ml
Standard White / Colours Trans / Metallics Curing System By means of humidity By means of humidity Components 1 1 Skin Formation At 23ᴼC & 50% RH 40 minutes 12 mins Curing At 23ᴼC & 50% RH 2,5 – 3 mm after 24 h 2,5 – 3 mm after 24 h Density ISO 1183 1,48 g/ml 1,06 g/ml Processing Temp +5ᴼC to +40ᴼC +5ᴼC to +40ᴼC Shore A Hardness ISO 868 – 3 seconds 40 35 Joint Movement Capacity ISO 11600 25% 12.5% Modulus ISO 8339 – 100% elongation 0,80 N/mm² 0,70 N/mm² Elongation at Break ISO 8339 230% 150% Modulus at Break ISO 8339 1,10 N/mm² 0,80 N/mm² Water Vapour Permeability ISO 15106 µ = 6946; sd = 4,9m Solvent & Isocyanate Content 0% 0% Service Temp -40ᴼC to +90ᴼC -40ᴼC to +90ᴼC Chemical Resistance Excellent Excellent UV Resistance Excellent Excellent Paint Compatibility Water Based: Yes
Solvent Based: Yes (Test compatibility)Water Based: Yes
Solvent Based: Yes (Test compatibility)Limitations
For overhead applications, always use in conjunction with mechanical fixings.
Use in conjunction with mechanical fixings for large, heavy mirrors. For other heavier items temporary support may be required until the adhesive has dried.
Do not seal mirror edges/plastic sheeting until adhesive has cured.
Do not use on surfaces that bleed oils or plasticisers.
Not for use as part of a structural glazing system, in aquarium manufacture or in conjunction with bitumen or asphalt.
When the colour white is used and there is limited natural light, yellowing can occur over time in predominantly dark conditions. This does not affect the products performance.
It is the user’s responsibility to determine suitability for use.