This is the ultimate high-performance grab adhesive. PRO1 can deliver a level of immediate grab strength that is typically double most other products on the market. Because of this using PRO1 can eliminate the need for costly temporary supports.
Featuring a special pre-cut nozzle to dispense an optimum bead width and shape, it’s the perfect companion for builders and shop fitters.
You can use Hippo PRO1 Power Bond on a wide range of adhesive projects, including fitting panels and elements during ceiling construction. Fixing heavy stone wall cladding elements. Gluing and fitting of high security glass, and general gap filling.
Key Features
- Incredible adhesive grab strength – replaces mechanical fixings.
- Stick virtually anything to anything.
- Will not stain materials
- Will not corrode metals
- Resistant to weather, extreme temperatures, mould & chemicals.
- Can be painted.
- Low pick-ability – perfect for high security areas.
- Does not contain solvents, isocyanates or phthalates.
- ECO-PAC packaging.
Hippo PRO1 White Power Bond Ultimate Grab Adhesive 400ml ECO-PAC
Standard White / Colours Clear / Metallics Curing System By means of humidity By means of humidity Components 1 1 Skin Formation At 23ᴼC & 50% RH 17 mins 12 mins Curing At 23ᴼC & 50% RH 2,5 – 3mm / 24 hours 2,5 – 3mm / 24 hours Density 1,56 g/ml 1,06 g/ml Processing Temp +5ᴼC to +40ᴼC +5ᴼC to +40ᴼC Shore A Hardness ISO 868 – 3 seconds 60 35 Joint Movement Capacity ISO 11600 20% 12.5% Modulus ISO 8339 – 100% elongation 1,6 N/mm² 0,70 N/mm² Elongation at Break ISO 8339 110% 150% Shearing Strength Beech / Beech Initial: 10 g/cm²
After 4 hours: 15 kg/cm²
After 1 week: 32 kg/cm²N/A Tensile Strength Beech / Beech Initial: 300 g/cm²
After 4 hours: 14 kg/cm²
After 1 week: 24 kg/cm²N/A Tensile Strength Alu / Alu After 2 weeks: 15 kg/cm²
After 2 weeks +20 min 180ᴼC: 20 kg/cm²N/A Solvent & Isocyanate Content 0% 0% Service Temp -40ᴼC to +90ᴼC -40ᴼC to +90ᴼC Chemical Resistance Excellent Excellent UV Resistance Excellent Excellent Paint Compatibility Water Based: Yes
Solvent Based: Yes (Test compatibility)Water Based: Yes
Solvent Based: Yes (Test compatibility)Limitations
For overhead applications, always use in conjunction with mechanical fixings.
Use in conjunction with mechanical fixings for large, heavy mirrors. For other heavier items temporary support may be required until the adhesive has dried.
Do not seal mirror edges/plastic sheeting until adhesive has cured.
Do not use on surfaces that bleed oils or plasticisers.
Not for use as part of a structural glazing system, in aquarium manufacture or in conjunction with bitumen or asphalt.
When the colour white is used and there is limited natural light, yellowing can occur over time in predominantly dark conditions. This does not affect the products performance.
It is the user’s responsibility to determine suitability for use.